Oil Filter 4 Micron 500-19-0056 Techni Water Jet Pump Parts For Sale
Oil Filter 4 Micron 500-19-0056 Techni Waterjet-Cutter-Machine-Price-p.html target='_blank'>Water Jet Pump Parts For Sale
The part 500-19-0056 is a genuine OEM oil filter cartridge for Waterjet Pump lubrication systems, featuring a 4 µm Polynet filtration media and a 19.5 inch element length to remove fine particulates and moisture from hydraulic oil. It fits standard 20″ filter housings (e.g., part 500-19-0030) and is essential for protecting intensifier seals, pistons, and valves in 60 000 psi Waterjet Pumps.
Specifications
Micron Rating:4 µm (captures particles ≥ 4 microns)
Element Length:19.5 inches
Configuration:“2-High” stacked pleated elements
Media Material:Polynet with moisture-absorbent layer
Operating Temp.:0 – 80 °C
Weight:≈ 3 kg (filter only)
Installation & Maintenance
Shutdown & Isolate: Depressurize and disconnect oil supply to the filter housing.
Open Housing: Use the filter shell spanner (500-19-0030) to remove the 20″ shell cap
Replace Element: Remove the old 500-19-0056 cartridge and insert the new Polynet filter, ensuring proper seating.
Reassemble: Reinstall and torque the shell cap per OEM specifications for a leak-free seal.
Flush & Test: Slowly repressurize the oil circuit and flush until oil runs clear of air bubbles, then resume normal operation.
Monitor Differential Pressure: Inspect filter ΔP every 200 hours; replace when recommended thresholds are reached
