Sealing Head Body 10106417 Waterjet Parts Supplier
Sealing Head Body 10106417 Waterjet Parts Supplier
The Sealing Head Body #10106417 is a critical high‑pressure component in KMT waterjet Pump-Good-Quality-Natural-Materials-Water-Jet-Cutter-For-Sale-p.html target='_blank'>Intensifier Pumps, specifically designed for 0.875 in plungers running up to 55,000 psi. It houses the inlet/outlet poppet valves and provides the structural interface for dynamic and static seals, ensuring leak‑free operation under ultra‑high‑pressure cycling.
Part Number: 10106417
Replaces: AccuStream 1‑11317
Plunger Diameter: 0.875 in (≈22.2 mm)
Pressure Rating: Up to 55,000 psi (≈3,800 bar)
Material: Stainless steel body, precision‑machined
Weight: ~5 lbs / 2.27 kg (shipping)
Installation & Maintenance Tips
System Flush: Completely flush the intensifier cylinder to remove abrasive grit before disassembly.
Surface Inspection: Examine the plunger and bore for scoring or pitting; polish or replace as needed to prevent seal damage.
Seal Preparation: Condition new seals in warm water (120 °F) for 3–5 min to improve flexibility.
Body Installation: Position the sealing head body onto the plunger, ensuring correct orientation of inlet/outlet poppets.
Lubrication: Lightly coat mating surfaces and seals with high‑vacuum grease to ease assembly and prevent dry start.
Torque Sequence: Reinstall cylinder head bolts in a crisscross pattern to the manufacturer’s torque specification.
Pressure Testing: After assembly, conduct a leak test at 10% above normal operating pressure (≤60,500 psi) to verify integrity.
