Water Jet Cutter Pump Ceramics 1L Accumulator Abrasive Waterjet Cutter

Short Description:

Attenuator capacity：1L
Voltage：380V
Rated power：30/40HP
Working pressure：420Mpa
Driving orifices Qty.：1-2
Maximum water flow：3.8L/min
Continuous working pressure：320Mpa-380Mpa
Temperature：5-40°C	
Weight：1T
Use for Abrasive Waterjet Cutting Machine
Stable pressure
Water Jet Cutter Pump,Abrasive Waterjet Cutter,Waterjet

INQUIRY

Details

Water Jet Cutter Pump Ceramics 1L Accumulator Abrasive Waterjet Cutter


Nominal Power Rate	40hp (30 kW)	Control Voltage & Power Supply	24V DC; 5 Amps DC
Max. Continuous Pressure	Max. Continuous Pressure	Max. Noise Level	75 dB (A)
Max. Water Flow Rate	1.0 gpm (3.8 L/min)	Ambient Operating Temperature	Min. 40ºF (5º C), Max. 104ºF(40º C)
Max. Single 20431118-Waterjet-Parts-In-Stock-p.html target='_blank'>20431118-Waterjet-Parts-In-Stock-p.html target='_blank'>Orifice Dia.	.014 in. (0.36 mm)	Hydraulic Reservoir Capacity	114 L
Length	1600mm	Attenuator Volume	1L
Width	1200mm	Weight	0.9t
Height	1100mm

The Water Jet Cutter Pump for water jet cutting is the core component of modern high-pressure water jet cutting systems and is widely used for precision cutting in industries such as metal, stone, glass, and composite materials. Its main function is to boost the low-pressure water source to a high pressure of 60,000 to 90,000 psi (about 4,100 to 6,200 bar) through the hydraulic booster principle to drive the Water Jet Cutting Head for efficient cutting.
The 9Water Jet Cutter Pump uses the oil pressure in the hydraulic system to push the 1-11508-Abrasive-Waterjet-Parts-With-Good-Quality-Supplier-p.html target='_blank'>Piston, which is connected to the plunger. The low-pressure oil pressure is converted into high-pressure water flow through the ratio of the piston area to the plunger area. This boosting principle is similar to the working mechanism of a hydraulic press, that is, the oil pressure multiplied by the piston area is equal to the water pressure multiplied by the plunger area.
Main components Water Jet Cutter Pump
Hydraulic system: Provides power to push the booster to perform piston movement.
Booster assembly: The core component, which generates high-pressure water flow by hydraulically driving the plunger.
Accumulator: Stores hydraulic energy to ensure the continuous operation of the booster.
Control system: Regulates and monitors the working status of the pump to ensure stable operation of the system.