Sheathing for 1/4 OD HP Tubing 1-12579 Good Quality High Pressure Waterjet Tube Parts

Short Description:

Parts:1-12579
Sheathing for 1/4 OD HP Tubing,Waterjet Tube Parts
Specifications
Inner Diameter (ID)：Designed for snug fit on 1/4 in. (≈ 6.35 mm) OD tubing
Outer Material：Durable polyethylene or similar protective polymer
Length：Sold in pre-cut lengths (standard 1 ft) or by the foot
Temperature Range：−20 °C to +80 °C (typical for protective sheathing)
Pressure Rating：N/A (sleeve only; tubing withstands 60–100 k psi)

INQUIRY

Details

Sheathing for 1/4 OD HP Tubing 1-12579 Good Quality High Pressure Waterjet Tube Parts

The AccuStream part 1-12579 is a 1/4 inch protective tubing sheath designed to encase and protect ultra-high-pressure waterjet tubing (1/4 in. OD) on systems rated for 60 000 psi or 100 000 psi service.

Specifications
Inner Diameter (ID)：Designed for snug fit on 1/4 in. (≈ 6.35 mm) OD tubing
Outer Material：Durable polyethylene or similar protective polymer
Length：Sold in pre-cut lengths (standard 1 ft) or by the foot
Temperature Range：−20 °C to +80 °C (typical for protective sheathing)
Pressure Rating：N/A (sleeve only; tubing withstands 60–100 k psi)

Installation & Maintenance
Cut to Length: Measure the run of 1/4 in. tubing and trim the sheath slightly longer for full Coverage.
Slide On: Before installing tubing into fittings, slide the sheath over the tubing; ensure ends are clear of fittings to avoid interference.
Secure Ends: Use zip-ties or clamps at each end to prevent migration during operation (optional).
Inspect Periodically: Check for cuts or abrasion; replace if protective layer is compromised.