Single Inlet SLV Sealing Head Assembly 20481005 Good Quality Water Jet Parts
Single Inlet SLV Sealing Head Assembly 20481005 Good Quality Water Jet Parts
The Single Inlet SL‑V Sealing Head Assembly 20481005 is the OEM high‑pressure sealing‑head unit for KMT Streamline SL‑V Intensifier-Assembly-80072333-Good-Quality-Water-Jet-Parts-In-Stock-p.html target='_blank'>Intensifier pumps using a 0.875″ Plunger, rated up to 60 000 psi (4 100 bar). It integrates the check‑Valve Body, Poppets, seats, Spring-F1000401-220-BFT-Abrasive-Water-Jet-Parts-In-Stock-p.html target='_blank'>Springs, guides, and hardware into one drop‑in assembly—streamlining SL‑V 75 s/100 s rebuilds and eliminating alignment issues from multiple individual parts.
KMT Part Number: 20481005
WSI SF20481005 (includes SF20481009 body, SF20453619 Inlet Poppet, SL05112768 outlet seat, SL05116561 Flat Outlet Poppet, SP05147863 spring, SF20474391 Inlet Poppet Retainer, SL05116751 spring guide, SL05116777 gland nut, SF20474395 inlet poppet screw)
Plunger Compatibility: 0.875″ (22.2 mm) intensifier plunger
Pressure Rating: 60 000 psi (4 100 bar) HP service
Configuration: Single‑inlet, flat‑outlet sealing‑head assembly for SL‑V (75 s/100 s) series
Includes: All check‑valve components, springs, guides, hardware, and gland nut in one unit
Installation & Maintenance
Depressurize & Drain: Fully relieve system pressure and drain water from the intensifier before disassembly.
Remove Old Assembly: Unbolt and extract the existing sealing‑head per KMT service manual guidelines.
Inspect & Clean: Examine the sealing‑head bore and valve bores for scratches or debris; polish minor imperfections.
Install New Assembly: Position 20481005, ensure flush seating, and torque mounting bolts to KMT specifications.
Repressurize & Test: Gradually restore pressure to 60 K psi and verify leak‑free operation before returning to service.
