Sheathing for 3/8 OD HP Tubing 1-12580 Good Quality High Pressure Waterjet Tube Parts

Short Description:

Parts:1-12580
Sheathing for 3/8 OD HP Tubing,Waterjet Tube Parts
Specifications
Inner Diameter (ID)：Sized for a snug fit on 3/8 in. (≈ 9.53 mm) OD tubing
Outer Material：Durable polyethylene or similar high-strength polymer
Length：Supplied in pre-cut lengths (standard 1 ft) or by the foot
Temperature Range：–20 °C to +80 °C
Pressure Rating：Sleeve is non-pressure-bearing; underlying tubing holds 60–100 k psi

INQUIRY

Details

Sheathing for 3/8 OD HP Tubing 1-12580 Good Quality High Pressure Waterjet Tube Parts

The AccuStream part 1-12580 is a 3/8 inch protective tubing sheath designed to slide over ultra-high-pressure waterjet tubing (3/8 in. OD) on 60 000 psi or 100 000 psi systems.

Specifications
Inner Diameter (ID)：Sized for a snug fit on 3/8 in. (≈ 9.53 mm) OD tubing
Outer Material：Durable polyethylene or similar high-strength polymer
Length：Supplied in pre-cut lengths (standard 1 ft) or by the foot
Temperature Range：–20 °C to +80 °C
Pressure Rating：Sleeve is non-pressure-bearing; underlying tubing holds 60–100 k psi

Installation & Maintenance
Measure & Cut: Determine required Coverage length; cut sheath slightly longer than tubing run.
Slide Over Tubing: Before attaching fittings, slide the sheath onto clean, dry tubing; position so ends clear fitting threads.
Secure Ends (Optional): Use cable ties or clamps near fittings to prevent migration.
Inspect Periodically: Check for cuts or abrasions; replace if the sheath is compromised to ensure continued protection.