Sealing Head Flat Outlet Poppet 05116603 Abrasive Waterjet Parts For Sale
1-11024-High-Pressure-Waterjet-Parts-In-Stock-For-Sale-p.html target='_blank'>Sealing-Head-Flat-Outlet-1-11014-Abrasive-Waterjet-Parts-With-Good-Quality-Supplier-p.html target='_blank'>Poppet-3HAC022379-001-Axis-2-3-For-Robot-Water-Jet-Cutting-Machine-Parts-In-Stock-p.html target='_blank'>Sealing-Head-Flat-Outlet-Poppet-05116561-Water-Jet-Parts-Supplier-p.html target='_blank'>05116561-Water-Jet-Parts-Supplier-p.html target='_blank'>Sealing Head 05116603-Abrasive-Waterjet-Parts-For-Sale-p.html target='_blank'>05116603-Abrasive-Waterjet-Parts-For-Sale-p.html target='_blank'>Flat Outlet Poppet 05116603 Abrasive Waterjet Parts For Sale
The Sealing Head Flat Outlet Poppet 05116603 is a precision‑machined, flat‑outlet discharge check valve designed for KMT Streamline SL‑IV Plus, SL‑V and SL‑VI Intensifier-Assembly-80072333-Good-Quality-Water-Jet-Parts-In-Stock-p.html target='_blank'>Intensifier pumps in the 75 hp and 100 hp configurations, compatible with a 1.125″ plunger under HP service (60 K psi).Its flat‑outlet geometry minimizes flow turbulence for smoother operation and extended service life.
Type: Flat outlet discharge poppet check valve
Plunger Compatibility: 1.125″ (28.6 mm) intensifier plungers
Weight: 0.019 lb (8.6 g)
Installation & Maintenance
1. Depressurize & Drain: Fully relieve system pressure and empty intensifier2. Remove Assembly: Disassemble sealing head per KMT service manual
3. Extract Old Poppet: Use pull‑out tool or press method, taking care not to gouge the bore
4. Inspect & Clean Bore: Remove debris; polish minor scratches for a flush seal
5. Install New Poppet: Press 05116603 into place, confirm full seating, then reassemble
6. Pressure‑Test: Repressurize slowly to 60 K psi and verify no leaks
If you need other KMT Waterjet Parts,Please contact us!