Sealing Head Flat Outlet Poppet Spring Guide 05116751 Abrasive Water Jet Cutting Machine Parts

Short Description:

Parts:05116751
Sealing Head Flat Outlet Poppet Spring Guide,Waterjet Parts

KMT Part Number 05116751
H20 part number: 102008-1
Other references: 103451, 11315, 30028, 5000055, 102008-1
Article number: 10090
Net Weight: 5 g

INQUIRY

Details

Spring Guide 05116751 Abrasive Water Jet Cutting Machine Parts

The Sealing Head Flat Outlet Poppet Spring Guide 05116751 is an OEM‑quality guide Bushing that centers and supports the flat‑outlet poppet valve spring within KMT Streamline Intensifier-Assembly-80072333-Good-Quality-Water-Jet-Parts-In-Stock-p.html target='_blank'>Intensifier sealing heads (SL‑IV, SL‑IV Plus, SL‑V, SL‑VI series) equipped with a .875″ Plunger. Engineered for both HP (60 K psi) and UHP (90 K psi) cycles, it ensures consistent spring alignment, reduces side‐loading wear on the poppet, and extends component life.

Specifications

Part Number: 05116751 (KMT Genuine Parts)
Function: Spring guide for flat‑outlet discharge poppet in high‑pressure sealing head assemblies
Compatible Plunger: 0.875″ (22.2 mm) intensifier plungers
Service Rating: Designed for HP (60 000 psi / 4 100 bar) and UHP (90 000 psi / 6 200 bar) cycling
Net Weight: ~5 g

Installation & Maintenance

1. Depressurize & Drain: Fully relieve system pressure and drain water from the intensifier.
2. Disassemble Sealing Head: Remove the sealing head assembly per KMT service manual instructions.
3. Replace Spring Guide: Press out the old guide; clean the bore; press in the new 05116751 guide until flush.
4. Reassemble & Test: Reinstall poppet, spring, and head components; repressurize slowly and verify leak‑free operation.

If you need other KMT Waterjet Parts,Please contact us!