Single Inlet HP Sealing Head Assembly SLV 75/100s 72110979 Abrasive Waterjet Parts Supplier

Short Description:

Parts:72110979
Single Inlet Sealing Head Assembly, Waterjet Parts

Other references: 5000535, 105682
Article number: 10509

INQUIRY

Details

Single Inlet Sealing Head Assembly 72110979 Abrasive Waterjet Parts Supplier

The Single Inlet Sealing-Head-Assembly-72142526-Water-Jet-Parts-In-Stock-p.html target='_blank'>HP Sealing Head Assembly 72110979 is the OEM drop‑in high‑pressure sealing head unit for KMT Streamline SL‑V 75s/100s Intensifier-Assembly-80072333-Good-Quality-Water-Jet-Parts-In-Stock-p.html target='_blank'>Intensifier pumps using a 1.125″ Plunger, rated for continuous service at 60,000 psi (4,100 bar). It consolidates the check‑Valve Body, inlet/outlet Poppets, seats, Spring-F1000401-220-BFT-Abrasive-Water-Jet-Parts-In-Stock-p.html target='_blank'>Springs, guides, gland nut, O‑rings, and hardware into a single stainless‑sTeel assembly.

Specifications
KMT Part Number: 72110979; “Sealing Head Assembly, HP, 1.125 Plunger, 60K”
Plunger Compatibility: 1.125″ (28.6 mm) intensifier plungers
Pressure Rating: Up to 60,000 psi (4,100 bar) HP service
Material: High‑grade stainless steel
Net Weight: Approximately 2.03 kg (4.48 lbs)

Installation & Maintenance
Depressurize & Drain: Fully relieve system pressure and drain the Intensifier Pump
Remove Old Assembly: Unbolt and extract the existing sealing head per KMT service manual
Clean & Inspect: Polish sealing and valve bores to remove debris and minor surface imperfections
Install New Assembly: Position 72110979, ensure flush seating, and torque mounting bolts to KMT specifications
Repressurize & Test: Gradually restore pressure to 60 K psi and verify leak‑free operation before resuming production