1/4 Two Way Angle Valves FT60VM4072 Good Quality High Pressure Waterjet Tube Parts

Short Description:

Parts:FT60VM4072
1/4 Two Way Angle Valves,Waterjet Tube Parts
Specifications
Port Size：1/4″ UNF inlet & outlet
Orientation：90° elbow
Valve Type：Two-way angle needle valve
Stem Design：Non-rotating V-stem to minimize galling
Seal Material：PTFE or equivalent high-pressure seal
Temperature Range：−20 °C to +120 °C

INQUIRY

Details

1/4 Two Way Angle Valves FT60VM4072 Good Quality High Pressure Waterjet Tube Parts

The WSI part FT60VM4072 is a 1/4″ UNF × 90° two-way hand valve assembly rated for 60 000 psi (4 100 bar) service in ultra-high-pressure waterjet systems.

Specifications
Port Size：1/4″ UNF inlet & outlet
Orientation：90° elbow
Valve Type：Two-way angle needle valve
Stem Design：Non-rotating V-stem to minimize galling
Seal Material：PTFE or equivalent high-pressure seal
Temperature Range：−20 °C to +120 °C

Installation & Maintenance
Depressurize System: Isolate and relieve all hydraulic/pneumatic pressures.
Remove Old Valve: Use appropriate high-pressure wrenches to unthread the existing 1/4″ 90° valve.
Inspect Components: Check threads, seals, and gland packing; replace any worn parts.
Install FT60VM4072: Hand-thread until snug, then torque to 20 ft-lb (or OEM-specified torque).
Leak Test: Slowly repressurize at low pressure, inspect for leaks, then ramp to full operating pressure.