1/4 Minor Swivel Repair Kit 1-12608 Good Quality High Pressure Waterjet Tube Parts

Short Description:

Parts:1-12608
1/4 Minor Swivel Repair Kit,Waterjet Tube Parts
Recommended for: GAR units with a 4000 bar pump.
Weight: 0.05 kg.
Working pressure: up to 4100 bar.
Material: Plastic, rubber, brass, stainless steel
Kit Contents
The 1-12608 Minor Swivel Repair Kit includes the wear parts needed to rebuild a ¼″ swivel assembly:
Swivel Seal: Primary dynamic seal
Bearing Backup: Secondary support for thrust bearings
Metal-Cased Wiper: Prevents contaminants ingress
O-Rings: Static seals for e

INQUIRY

Details

1/4 Minor Swivel Repair Kit 1-12608 Good Quality High Pressure Waterjet Tube Parts

The AccuStream 1-12608 is a ¼″ Minor Swivel Repair Kit designed to rebuild both inline and 90° swivel assemblies on ultra-high-pressure waterjet systems rated up to 60 000 psi. It replaces OEM repair kits and comprises key wear components—swivel Seals, bearing backups, metal-cased wipers, and O-Rings—to restore leak-free, full-rotation performance.

Kit Contents
The 1-12608 Minor Swivel Repair Kit includes the wear parts needed to rebuild a ¼″ swivel assembly:
Swivel Seal: Primary Dynamic Seal
Bearing Backup: Secondary support for thrust bearings
Metal-Cased Wiper: Prevents contaminants ingress
O-Rings: Intensifier-Pump-Seal-p.html target='_blank'>Static Seals for end faces

Installation & Maintenance
Depressurize System: Isolate and relieve all line pressures.
Disassemble Swivel: Remove the swivel from the line using proper high-pressure wrenches.
Replace Kit Components: Extract old seals, backups, wipers, and O-rings; install new 1-12608 kit parts in the housing per schematic.
Reassemble & Torque: Reinstall swivel assembly, torque to 20 ft-lb (or OEM spec).
Leak & Rotation Test: Repressurize at low pressure, verify no leaks, then cycle through full rotation to confirm smooth operation.