9/16 Two Way Angle Valves FT60VM9072 Good Quality High Pressure Waterjet Tube Parts

Short Description:

Parts:FT60VM9072
9/16 Two Way Angle Valves,Waterjet Tube Parts
Specifications
Port Size：9/16″ UNF inlet × 9/16″ UNF outlet
Orientation：90° elbow
Pressure Rating：60 000 psi (4 100 bar)
Material Grade：316 SS stainless steel
Finish：Passivated for corrosion resistance
Operating Temp.：−20 °C to +120 °C

INQUIRY

Details

9/16 Two Way Angle Valves FT60VM9072 Good Quality High Pressure Waterjet Tube Parts

The WSI part FT60VM9072 is a 90° valve adapter with 9/16″ UNF ports, rated for 60 000 psi (4 100 bar) service in ultra-high-pressure waterjet systems.

Specifications
Port Size：9/16″ UNF inlet × 9/16″ UNF outlet
Orientation：90° elbow
Pressure Rating：60 000 psi (4 100 bar)
Material Grade：316 SS stainless sTeel
Finish：Passivated for corrosion resistance
Operating Temp.：−20 °C to +120 °C

Installation & Maintenance
Depressurize System: Fully isolate and relieve both hydraulic and pneumatic pressures before servicing.
Remove Old Adapter: Use appropriate high-pressure wrenches to unthread the existing 9/16″ valve adapter.
Inspect & Clean: Verify thread integrity, clean mating surfaces, and replace any worn O-Rings or thread-Seal components.
Install New Adapter: Thread FT60VM9072 hand-tight, then torque to 20 ft-lb (or per OEM specification) to ensure a leak-free seal.
Leak Test: Repressurize at low pressure, inspect for leaks at all joints, then ramp to full 60 000 psi to confirm integrity.